Sacramento engineered wood siding

Engineered Wood Siding in Sacramento, CA: LP SmartSide Siding Costs, Products, Fire-Zone Listings and Installation Standards

2026 LP SmartSide and engineered wood siding costs, product lines, warranty terms, CAL FIRE assembly listings and installation standards for Sacramento homes.

Craftsman-style Sacramento home with engineered wood lap and board-and-batten siding

Engineered wood siding in Sacramento, CA costs $10–$17 per square foot installed in 2026, or $24,000–$50,000 for a whole-home re-side. Engineered wood siding (LP SmartSide, composite wood siding) is cladding made of wood strands bonded with resin and wax and treated with zinc borate. Two Sacramento conditions shape the material: zinc borate protection against local termites, and a 180-day paint window that summer sun shortens on south and west walls. Inside a fire hazard zone, engineered wood qualifies only as part of a tested wall assembly. This page is part of the siding installation in Sacramento guide.

What is LP SmartSide siding?

LP SmartSide siding is engineered wood siding made by Louisiana-Pacific from wood strands, waxes and resin binders, treated with zinc borate through the SmartGuard process against termites and fungal decay. LP launched SmartSide in 1997 and reports more than 10 billion square feet sold.

What is engineered wood siding made of?

Engineered wood siding is made of 4 components: wood strands, MDI resin, wax and zinc borate, pressed under heat and faced with a phenolic overlay in a cedar-grain or smooth texture.

Cutaway of engineered wood siding showing its phenolic overlay, wood strand core, MDI resin, and wax and zinc borate

Is composite siding the same as engineered wood siding?

No. “Composite siding” names 3 different products in Sacramento, and engineered wood is only 1 of them.

Table A separates 3 siding products sold as “composite” in Sacramento by core material, example brands, paint requirement and fire-zone path. This page covers the first row.

Table A. 3 siding products sold as “composite”

TypeCore materialExample brandsPaint requiredFire-zone path
Engineered woodWood strands bonded with resin, wax and zinc borateLP SmartSide, Collins TruWood, KWPYes, unless prefinishedTested wall assembly (CWUIC 504.5)
Cellular PVC compositePolymer foam coreAlside Ascend, CertainTeed CelectNoProduct-specific listing or tested assembly
Wood-plastic compositeWood fiber mixed with plasticNewTechWoodNoProduct-specific listing or tested assembly

What is engineered wood siding also known as?

Engineered wood siding is also known as composite wood siding, wood composite siding, LP siding, SmartSide and strand siding.

Is engineered wood siding good?

Engineered wood siding has 4 measurable strengths:

  • Warranty start: LP repairs or replaces failed product at full cost for the first 5 years.
  • Hail coverage: the LP warranty covers hail up to 1.75 inches in diameter.
  • Weight: about 45% lighter per square foot than fiber cement, according to Fixr.
  • Workability: boards cut with standard woodworking saws and no silica-dust controls.

How much does LP SmartSide siding cost in Sacramento in 2026?

LP SmartSide siding costs $10–$17 per square foot installed in Sacramento in 2026, compared with $7–$12 per square foot nationally (HomeGuide). A whole-home engineered wood re-side costs $24,000–$50,000.

Table B shows 2026 installed engineered wood siding cost by wall area in Sacramento and nationally. Rows list wall area, not floor area. Costs include labor and materials in US dollars.

Table B. Installed engineered wood siding cost by wall area, 2026 (calculated by Sacramento Siding Pros from 2026 local rates)

Wall areaSacramento installed ($10–$17/sq ft)National installed ($7–$12/sq ft)
1,000 sq ft (10 squares)$10,000–$17,000$7,000–$12,000
1,500 sq ft (15 squares)$15,000–$25,500$10,500–$18,000
2,000 sq ft (20 squares)$20,000–$34,000$14,000–$24,000
2,500 sq ft (25 squares)$25,000–$42,500$17,500–$30,000

A 1,500 sq ft single-story Sacramento home has about 1,630 sq ft of wall and costs $16,300–$27,710 in engineered wood. Estimates for 7 house sizes appear in siding cost in Sacramento.

Which 5 factors change an engineered wood estimate?

5 factors change an engineered wood siding estimate in Sacramento:

  1. Finish type: primed boards add a painting line item; ExpertFinish and Diamond Kote boards cost more up front.
  2. Tear-off: removing old siding adds $0.70–$2.00 per square foot.
  3. Story count: 2-story walls require scaffolding or lifts.
  4. Trim scope: LP trim, fascia and soffit add linear-foot labor.
  5. Fire-zone assembly: Fire Hazard Severity Zone addresses may add LP FlameBlock sheathing, gypsum board or another tested backing.

Material orders include a 10% waste allowance.

Is engineered wood siding cheaper than fiber cement?

Yes. Engineered wood siding costs $10–$17 per square foot installed in Sacramento, against $12–$22 for fiber cement and $6–$13 for vinyl. Per year of lifespan, engineered wood costs $0.54 per square foot, against $0.43 for fiber cement and $0.32 for vinyl ($13.50 midpoint ÷ 25-year midpoint).

Which LP SmartSide products are installed on Sacramento homes?

LP SmartSide sells 6 siding and trim product lines: lap siding, panel siding, vertical siding, Nickel Gap, Cedar Texture Shakes and trim with fascia and soffit.

Table C lists 6 LP SmartSide product lines by profile, size, texture and common use on Sacramento homes. Dimensions come from LP product literature and distributor specification pages.

Table C. LP SmartSide product lines and Sacramento uses

ProductProfileSizeTextureCommon Sacramento use
Lap siding (38 Series)Horizontal lap0.354″ (3/8″ nominal); 6″, 8″, 12″ widths; 16 ftCedar texture or smoothRanch and tract home re-sides
Lap siding (76 Series)Horizontal lap0.418″ (7/16″ nominal); 7.84″ and 11.84″ widths; 16 ftCedar texture or smoothWalls framed at 24″ on center
Panel siding (76 Series)Vertical sheet, square or shiplap edge0.418″; 4 ft wide; 8, 9 or 10 ft longCedar textureReplacing T1-11 on 1970s–1990s homes
Vertical sidingVertical boards with battens16 ftCedar textureBoard and batten gables, ADUs
Nickel GapFlat boards with a narrow revealNominal 1/2″; 7″ revealSmoothModern infill homes and ADUs
Cedar Texture ShakesShake panels, staggered or straight edgePanel lengths varyCedar textureGables and Craftsman accents
Trim, fascia, soffitCorner boards, window trim, vented or solid soffit16 ftCedar texture or smoothWindows, corners and eaves

LP SmartSide board and batten combines vertical or panel siding with LP trim battens over the seams. T1-11 replacement is covered in T1-11 siding problems.

What is the difference between primed and ExpertFinish LP SmartSide?

ExpertFinish LP SmartSide arrives factory-prefinished in 16 colors with a 15-year limited finish warranty, while primed LP SmartSide receives a field-applied topcoat within 180 days of installation. LP lists the ExpertFinish warranty as 5/15/50: 5 years at full coverage, 15 years on the finish and 50 years on the substrate. Color selection for Sacramento sun exposure is covered in siding colors for Sacramento heat.

What is Diamond Kote siding?

Diamond Kote siding is a prefinished siding system built on LP SmartSide substrate, with a factory finish backed by a 30-year no-fade warranty. Diamond Kote Building Products (Wisconsin) offers 23 solid and 6 duo-blend colors, board and batten profiles, and the RigidStack panel, which locks each course on a spline and hides the fasteners.

Which engineered wood siding brands compete with LP SmartSide?

3 engineered wood siding brands sell in North America: LP SmartSide, TruWood by Collins and KWP.

Table D compares 3 engineered wood siding brands by manufacturer, product types, substrate warranty and CAL FIRE listing. Values come from manufacturer literature and the CAL FIRE Building Materials Listing (checked October 2026). “Not published” means no manufacturer source was found.

Table D. Engineered wood siding brands

BrandManufacturerProduct typesSubstrate warrantyCAL FIRE listing
LP SmartSideLouisiana-PacificLap, panel, vertical, Nickel Gap, shakes, trim, soffit50-year limited, prorated after year 5BML 8140-2027:0001, :0002, :0005
TruWoodCollinsLap, panel, shakes, trim30-year transferableNot listed (October 2026)
KWPKWP Building ProductsNot publishedNot publishedNot listed (October 2026)

The 3 brands differ on 3 neutral criteria: warranty length, CAL FIRE listing status and local installer availability.

How does engineered wood siding perform in Sacramento’s climate?

Engineered wood siding stays dimensionally stable in Sacramento’s 100°F+ summers once painted, but unsealed cut edges and ground contact let water swell the wood strands.

Is LP SmartSide good for Sacramento heat?

Yes. LP SmartSide does not soften in Sacramento heat, unlike vinyl siding, which distorts near 160–165°F. The heat risk sits in the paint schedule: LP requires a finish coat on primed boards within 180 days, and primer on south and west walls takes direct sun through about 23 days at or above 100°F per year (National Weather Service Sacramento).

Do termites eat engineered wood siding?

Zinc borate treatment through the SmartGuard process gives SmartSide strands resistance to termite damage, not immunity. LP’s 2025 warranty covers a “ZB Resistance Issue”: structural damage caused by a breakdown of the zinc borate treatment against fungal decay or termites. Surface termite activity without structural damage is excluded, so routine termite inspections continue after re-siding. UC Statewide IPM documents western subterranean and drywood termites in the Sacramento Valley, and both species still reach framing, sill plates and untreated trim.

Is engineered wood siding waterproof?

No. Engineered wood siding is water-resistant, and LP requires a breathable water-resistive barrier behind it. Sacramento receives about 21 inches of rain per year, mostly November–March, and lawn sprinklers wet the bottom course in dry months.

Does LP SmartSide resist hail?

Yes. The LP SmartSide warranty covers hail damage from hailstones up to 1.75 inches in diameter.

Is engineered wood siding allowed in Sacramento fire zones?

Engineered wood siding is combustible, so inside a Fire Hazard Severity Zone LP SmartSide qualifies only as part of a tested wall assembly, such as lap siding over LP FlameBlock fire-rated sheathing (BML 8140-2027:0005).

Which LP SmartSide assemblies does CAL FIRE list?

The CAL FIRE Building Materials Listing includes 3 core LP SmartSide wall assemblies, each issued July 3, 2026 and valid through June 30, 2027:

  • BML 8140-2027:0001: LP SmartSide 3/8-inch lap siding over 1/2-inch standard gypsum wallboard.
  • BML 8140-2027:0002: LP SmartSide 7/16-inch panel siding.
  • BML 8140-2027:0005: LP SmartSide lap siding over 7/16-inch LP FlameBlock fire-rated OSB sheathing.

LP FlameBlock is APA-rated OSB with a noncombustible, fiberglass-reinforced Pyrotite coating. Listings are subject to re-examination, revision and cancellation, so the installer confirms the current listing for each job.

Which fire code applies to siding in Sacramento?

The California Wildland-Urban Interface Code (CWUIC, Title 24 Part 7) governs siding in Sacramento fire hazard zones as of January 1, 2026. The CWUIC replaced CBC Chapter 7A. Section 504.5 gives exterior walls 2 compliance paths: a wall built by 1 of 9 listed methods, including SFM 12-7A-1 and ASTM E2707 tested assemblies, or a wall covering that meets Section 504.5.2. LP SmartSide uses the tested-assembly path. The 2025 OSFM Fire Hazard Severity Zone maps show 45 acres in the City of Sacramento and about 78,000 acres in Sacramento County, led by Rancho Cordova and Folsom. Sacramento Metropolitan Fire District adopted the map in Ordinance 2025-01.

Does engineered wood siding meet the Safer from Wildfires base rule?

No. The California Department of Insurance Safer from Wildfires framework lists 6 vertical inches of noncombustible material at the base of exterior walls, and engineered wood is combustible. The 6 inches are measured from the ground and from attached horizontal surfaces such as decks. The Department names 4 qualifying materials: brick, stone, fiber-cement siding and concrete. Safer from Wildfires is an insurance home-hardening framework, separate from the building code rules for wall assemblies. Noncombustible siding options are covered in fiber cement siding installation in Sacramento and fire-resistant siding in Sacramento.

How is engineered wood siding installed?

Engineered wood siding installation follows 9 steps:

  1. Remove the old siding, under EPA lead-safe (RRP) rules on pre-1978 homes.
  2. Repair damaged sheathing and dry rot.
  3. Insulate opened wall cavities to Title 24 Part 6: R-15 in 2×4 walls and R-21 in 2×6 walls where existing siding stays in place; walls with siding removed are checked against the Table 150.1-A U-factor.
  4. Wrap the wall in a breathable water-resistive barrier.
  5. Flash windows, doors and roof-wall intersections, with kick-out flashing at roof edges.
  6. Install the starter strip and LP trim.
  7. Nail lap boards with 8d hot-dipped galvanized nails and a 1-inch minimum lap.
  8. Seal cut edges, 3/16-inch gaps and butt joints with ASTM C920 Class 25 sealant.
  9. Paint primed boards within 180 days of installation.

Which clearances does LP SmartSide require?

LP SmartSide requires 6 inches of clearance to finished grade and 1 inch above roofs, porches, patios and walks.

Table E lists 5 LP SmartSide installation clearances and the Sacramento condition each one protects against. Values come from the LP SmartSide lap siding installation instructions.

Table E. LP SmartSide clearances in Sacramento

LocationMinimumSacramento condition
Finished grade6″Sprinkler overspray and wet soil
Roof intersection1″Winter roof runoff
Porches, patios, walks1″Splash-back from winter rain
Butt joints and trim3/16″ gap, sealedMoisture and heat movement
Lap overlap1″ (1-3/8″ for beaded lap)Wind-driven rain

Installation outside these clearances falls outside LP’s instructions, and the LP warranty excludes product not applied and finished in strict accordance with those instructions.

LP SmartSide lap siding clearances on a home: 6 inches to finished grade, 1 inch above patios, walks and porches, 1 inch at roof intersections, a sealed 3/16-inch gap at butt joints and trim, and a 1-inch lap overlap

Which nails and stud spacing does LP SmartSide use?

LP SmartSide lap siding uses 8d hot-dipped galvanized nails (0.113-inch shank, 0.270-inch head) driven at least 1-1/2 inches into framing, and no staples. Most SmartSide products span studs up to 16 inches on center. 76 Series lap and 190 Series panel siding span up to 24 inches on center when nailed directly to studs.

Nail depth matters as much as nail size. LP names overdriven and underdriven nails as 1 of 4 common installation mistakes, because an overdriven head breaks the overlay. A nail countersunk deeper than 1/8 inch is sealed and re-nailed.

Diagram of LP SmartSide nailing and stud spacing: a flush-driven 8d hot-dipped galvanized nail versus an overdriven nail countersunk more than 1/8 inch, and studs at 16 inches on center for standard SmartSide or 24 inches for 76 Series and 190 Series

Can LP SmartSide go over existing siding?

LP’s lap siding instructions cover 4 substrates (sheathed walls, bare studs, masonry with furring and rigid foam) and do not list existing siding. On 1970s–1990s Sacramento homes, T1-11 often doubles as structural sheathing, so the T1-11 stays on the wall under a new water-resistive barrier. Related failures are covered in hardboard siding problems.

How long does engineered wood siding installation take?

Most whole-home siding installations in Sacramento take 1–2 weeks, against 5–7 working days for single-story vinyl. Primed engineered wood adds a painting step.

How long does LP SmartSide siding last in Sacramento?

LP SmartSide siding lasts 20–30 years in Sacramento. The 50-year LP warranty is a proration schedule, not a lifespan estimate.

What does the LP SmartSide warranty cover?

The LP SmartSide warranty covers the siding substrate for 50 years against fungal decay, termites and manufacturing defects that cause structural failure, with labor and material paid for the first 5 years. The current edition (LPZB0523) applies to purchases on or after August 1, 2025, and has 7 terms:

  • Years 1–5: LP pays labor and material to repair or replace damaged substrate, based on an R.S. Means estimate.
  • Years 6–50: LP pays material cost only, reduced by 2.22% per year, reaching zero at the end of year 50.
  • Hail claims: material only, no labor, after the homeowner’s insurance claim.
  • Payment cap: total payments reach no more than 2 times the original purchase price.
  • Transfer: coverage extends to the original owner and the next owner of the home.
  • Covered damage: fungal decay, structural termite damage and hail up to 1.75 inches.
  • Claim rule: notice to LP within 30 days of discovery, before any permanent repair, with proof of the installation date and the product’s mill markings.

The LP warranty (2021 edition) excludes surface or edge swelling, edge checking and product not installed, finished and maintained under LP’s instructions. Labor after year 5 comes from the installer’s written workmanship warranty.

How do you maintain engineered wood siding?

There are 5 maintenance tasks for engineered wood siding in Sacramento:

  1. Inspect caulk joints and paint once a year.
  2. Wash walls with mild detergent and a garden hose, not a pressure washer.
  3. Repaint primed boards on the interval the paint manufacturer warrants.
  4. Aim lawn sprinklers away from the bottom course.
  5. Keep soil and mulch 6 inches below the bottom course.

Swollen or damaged boards fall under siding repair in Sacramento. Full tear-off projects fall under siding replacement in Sacramento. Material lifespans are compared in how long siding lasts in Sacramento.

What are the problems with LP SmartSide siding?

LP SmartSide siding has 5 documented problems: edge swelling at unsealed cuts, failure at missing ground clearance, overlay damage from overdriven nails, paint upkeep on primed boards, and combustibility outside a tested wall assembly.

  1. Edge swelling: the LP warranty excludes swelling and edge checking.
  2. Ground contact: boards within 6 inches of soil absorb sprinkler and rain water.
  3. Overdriven nails: broken overlay lets water into the strands.
  4. Paint upkeep: primed boards carry no finish warranty.
  5. Combustibility: engineered wood alone does not qualify in a Fire Hazard Severity Zone.

All 5 problems trace to installation, finish or placement covered in LP’s written instructions.

Swollen, water-damaged edge on engineered wood lap siding installed too close to the foundation and mulch bed

Was LP siding part of a class action lawsuit?

Yes. LP’s earlier Inner-Seal OSB siding was the subject of a class action, and LP paid more than 129,000 claims on Inner-Seal. LP re-engineered the product, and SmartSide launched in 1997 with 3 changes: zinc borate, MDI resin and a phenolic overlay.

How does engineered wood siding compare with fiber cement and vinyl?

Table F compares 3 siding materials installed in Sacramento by cost, lifespan, fire-zone status, heat behavior and finish.

Table F. Engineered wood, fiber cement and vinyl siding in Sacramento

MaterialSacramento installed ($/sq ft)LifespanFire-zone statusHeat behaviorFinish
Vinyl$6–$1320–40 yearsNot compliant as standalone claddingDistorts near 160–165°FColor through the panel
Engineered wood$10–$1720–30 yearsTested wall assembly onlyStable; edges need sealingFactory prefinish or field paint
Fiber cement$12–$2230–50 yearsNoncombustible (ASTM E136)Stable; no softeningFactory finish or field paint

Fiber cement is the only noncombustible material of the 3. Material details appear in vinyl siding installation in Sacramento, fiber cement siding installation in Sacramento and best siding for Sacramento’s climate. Natural cedar and redwood are covered in wood siding installation in Sacramento.

How do you choose an engineered wood siding installer in Sacramento?

There are 7 checks for an engineered wood siding installer in Sacramento:

  1. Verify the CSLB license, required for jobs of $1,000 or more since AB 2622.
  2. Confirm workers’ compensation and general liability insurance.
  3. Check the LP contractor locator, if the installer claims an LP program.
  4. Require the product line, series and finish (primed, ExpertFinish or Diamond Kote) on the written quote.
  5. Ask for the CAL FIRE listing number or tested-assembly report, if the address is in a Fire Hazard Severity Zone.
  6. Ask for the permit path: the $132 CDD-0185 exemption or a full building permit.
  7. Compare written labor warranty terms for the years after LP’s 5-year period.

These checks apply to engineered wood siding contractors and composite siding installers across Sacramento, Elk Grove, Roseville, Folsom, Citrus Heights, Rancho Cordova and Auburn. Contractor vetting is covered in choose a licensed siding contractor in Sacramento.

Get an engineered wood siding estimate in Sacramento

Compare written quotes from licensed LP SmartSide siding installers serving Sacramento County. Financing options are available on approved projects.

Engineered wood siding FAQ

How much does LP SmartSide cost in Sacramento?

LP SmartSide siding costs $10–$17 per square foot installed in Sacramento in 2026. A whole-home re-side costs $24,000–$50,000.

What is composite wood siding?

Composite wood siding is another name for engineered wood siding: wood strands bonded with resin and wax. Table A lists 2 other “composite” products.

Can you paint LP SmartSide?

Yes. LP recommends high-quality acrylic latex paint, applied within 180 days of installation. LP excludes semi-transparent and transparent stains, shake and shingle paints, and vinyl-based paints such as PVA and vinyl acetate.

Is LP SmartSide sustainable?

LP SmartSide is made from wood grown and gathered under Sustainable Forestry Initiative (SFI) standards, according to LP. LP reports using 99% of each log for product or for manufacturing fuel.

Do you need a permit to install engineered wood siding in Sacramento?

A like-for-like siding replacement in the City of Sacramento qualifies for the $132 CDD-0185 permit exemption, except in historic districts. Other projects require a full building permit ($500–$1,000, contractor-reported).

How thick is LP SmartSide lap siding?

LP SmartSide 38 Series lap siding is 0.354 inch thick (3/8 inch nominal), and 76 Series lap siding is 0.418 inch thick (7/16 inch nominal). Both series come in 16-foot lengths.

Does LP SmartSide come prefinished?

Yes. LP SmartSide ExpertFinish comes in 16 factory colors, and Diamond Kote prefinishes LP SmartSide substrate in 23 solid and 6 duo-blend colors.

Can engineered wood siding be repaired?

Yes. Damaged engineered wood siding is repaired board by board, with new boards sealed, primed and painted to match.

Engineered wood siding in Sacramento: summary

Engineered wood siding in Sacramento costs $10–$17 per square foot installed in 2026, and LP SmartSide siding carries a 50-year prorated substrate warranty with full coverage for the first 5 years. Sealed cut edges, 6-inch grade clearance and paint within 180 days are the 3 installation standards that protect engineered wood siding in Sacramento, and fire-zone addresses add a tested wall assembly. Material options and project steps for every siding type are covered in siding installation in Sacramento.